Certified Products
Anti-Corrosive Topcoat VOC
Wed, 05/26/2010 - 07:41 — greenwiseParameter:
VOC (EPA Method 24)
Results:
≤ 250 g/L
Anti-Corrosive Topcoat Chemical Limitations
Tue, 05/25/2010 - 09:06 — greenwiseParameter:
Chemical Component Limitations
Results:
Does not contain the prohibited chemicals listed at the bottom of this page as ingredients.
Anti-Corrosive Topcoat Weathering
Tue, 05/25/2010 - 09:06 — greenwiseParameter:
Accelerated Weathering and Water Resistance
Results:
After testing in accelerated aging apparatus, must show no blistering after 24 hours. After 1000 hours, good color retention plus no blistering, cracking, peeling, flaking, or chalking.
Anti-Corrosive Topcoat Flexibility
Tue, 05/25/2010 - 09:05 — greenwiseParameter:
Flexibility
Results:
No Cracking, flaking, or peeling upon bending.
Anti-Corrosive Topcoat Adhesion
Tue, 05/25/2010 - 09:05 — greenwiseParameter:
Adhesion
Results:
50% adhesion or better over metal after 1 week cure at ambient conditions.
Anti-Corrosive Topcoat Cyclic Prohesion
Tue, 05/25/2010 - 09:04 — greenwiseParameter:
Cyclic Prohesion
Results:
Minimum of ASTM 8 rusting after one complete cycle of cyclic prohesion test.
Anti-Corrosive Topcoat Odor
Tue, 05/25/2010 - 09:04 — greenwiseParameter:
Odor Test
Results:
Substantially lower odor than conventional latex paints. Only for interior or interior/exterior coatings.
Anti-Corrosive Topcoat Y-Reflectance
Tue, 05/25/2010 - 09:03 — greenwiseParameter:
Y-Reflectance
Results:
80% minimum
Anti-Corrosive Topcoat Contrast
Tue, 05/25/2010 - 09:02 — greenwiseParameter:
Contrast Ratio
Results:
0.95 minimum